Windows Usb Installation Tool Gigabyte Hot! Direct

Insert the USB into a rear USB 2.0 port (often more reliable for booting than USB 3.2). Power on and repeatedly press the key to enter BIOS. Under the BIOS tab, locate “Windows 8/10 Features” (or “OS Type”) and set it to “Windows UEFI” (not “Other OS” or “Legacy”). Then, ensure CSM (Compatibility Support Module) is disabled. This forces the board to boot only in pure UEFI mode, which your GPT-formatted USB expects.

Crucially, for Gigabyte motherboards manufactured after 2012, you must prepare the USB as . Legacy MBR mode is only for outdated BIOS systems. Using the wrong scheme results in the dreaded “No bootable device found” error. windows usb installation tool gigabyte

Where Gigabyte stands out is its . Instead of diving into BIOS, press F12 at the splash screen. The menu will list all drives—but your USB may appear twice: once as “UEFI: USB Drive Name” and once as just “USB Drive Name.” Always select the “UEFI:” prefixed entry. Selecting the non-UEFI entry either fails or launches the installer in legacy mode, which will refuse to install on a GPT drive, leading to cryptic “Windows cannot be installed to this disk” errors. Insert the USB into a rear USB 2