Wet your finger (or use a smoothing tool) and run it lightly over the bead to press it into the gap and create a concave finish. Wipe excess caulk onto your rag.
Resealing window frames takes an afternoon and costs under $30. It’ll stop drafts, keep out moisture, and put money back in your pocket every month. Plus, there’s something deeply satisfying about eliminating that one annoying draft for good. resealing window frames
Use your putty knife to scrape away any loose, peeling, or hardened old caulk. You want a clean, bare surface for the new sealant to stick to. Vacuum out any dust or debris. Wet your finger (or use a smoothing tool)
Cut the nozzle at a 45-degree angle. Start with a small hole—you can always cut more. Puncture the inner seal with a long nail or the built-in poker on most caulk guns. It’ll stop drafts, keep out moisture, and put
Peel off the painter’s tape while the caulk is still wet. Allow the seal to cure for as long as the manufacturer recommends (usually 24 hours) before exposing it to rain or extreme temperatures.
The good news is that resealing window frames is one of the most cost-effective DIY projects you can tackle. For the price of a few tubes of caulk, you can save up to 15% on heating and cooling costs.