Performance, Limitations, and Specification of ASTM A307 Anchor Bolts in Structural Applications
Do not use mechanically galvanized or electroplated coatings for embedded anchor bolts—hydrogen embrittlement risk is elevated for low-carbon bolts. a307 anchor bolt
| Property | Value | | :--- | :--- | | | 60 ksi (414 MPa) minimum | | Yield Strength | 36 ksi (248 MPa) minimum (typical, not mandatory by ASTM but implied by material) | | Elongation | 18% minimum (in 8 in.) – High ductility | | Hardness | Brinell 100–241 | | Threads | UNC series (Class 1A or 2A) | | Material | Low-carbon steel (e.g., A36, 1018) | a307 anchor bolt
| Environment | Required Protection | | :--- | :--- | | | As-rolled (plain) acceptable | | Exterior, moderate | Hot-dip galvanized per ASTM A153 (minimum 2.0 oz/ft²) | | Coastal/marine | Stainless steel (Type 304 or 316) – A307 spec does not apply; use F1554 | | Embedded in concrete | No coating required (alkaline passivation) – but cutoff must be above ground | a307 anchor bolt